-
System uses Intelligent Servo Motors
-
Software designed exclusively for plasma and oxy/fuel cutting
-
Drive system uses no external electronics
-
Drive system available with dual servos for the X axis drives
-
Dual servo drives eliminate the cross shaft.
-
Dual X axis servo drives automatically square the gantry
-
Precision planetary gearboxes used for RPM reduction
-
Large software on-screen table representation
-
On-screen table configurable in size and shape
-
Cutting object on screen previews
-
Continuous torch cutting path shown
-
Zoom in feature to show cutting details
-
Large, bright easy to read torch position indicators
-
Individual or synchronized X Y axis zeroing controls
-
Large assortment of machine function indicators.
-
Machine protection diagnostic read outs
-
One button emergency stop recovery.
-
Single screen for torch X & Y movement and arc voltage torch height control
-
On-screen pierce height control.
-
On-screen torch height control
-
On-screen real time arc voltage monitor read out
-
Settable plasma arc confirmation monitoring
-
On-screen and keyboard X, Y and Z jogging controls
-
Infinite selection of jogging speeds with on screen speed control
-
Continuous, fixed length or joystick jogging
-
On-screen jogging speed control
-
Screen reconfigures for plasma or oxy/fuel cutting
-
On-screen rapid traverse and cutting speed controls
-
Complete operators manual help available on screen
-
Preset position buttons on screen for Material loading, Torch servicing , Home and 0/0 locations
-
On screen job costing information for total cut length, time and pierce number.
-
Simple initial machine configuration
-
Small hole and arc speed reduction with torch height lock.
-
On-screen cutting file editing feature with step file verification
-
Color selection for preview, background and object cutting
-
Joystick for machine control, jogging and freehand cutting
-
Shop power failure recovery system (Restart)
-
Plate alignment correction feature
-
On screen G-Code editor.
-
Selectable pierce time dwell
-
System can remember machine settings for later recall
-
System can append machine settings to any cutting file
-
Rapid traverse moves show on screen as dotted lines.
-
System can be configured for English or metric measure
-
Separate on screen timers for oxy-fuel control of preheat dwell, pierce dwell and post flow.
-
System remembers Oxy-fuel torch height cut and separate preheat height setting between cuts
-
Process specific software for each cutting process (plasma or oxy-fuel).
